Pepsi Quaker
Direct customer reference
OAT FLAKING MILL
Food-Grade Oat Flaking for Standard Processing Lines
Built for food-grade oat flake production and standard oat flaking applications. Review available models, target thickness, and single-machine fit before moving into wider line planning.
Since 1997Built on long-term flaking experience
50+ CountriesServing global feed and food processors
Food-GradeDesigned for food-grade oat flaking applications
SS304 ContactFood-grade sealed contact structure
Customer References
Selected Oat Flaking Mill References
Bellaex oat flaking mills are already used by multiple branded oat processors in China.
In China’s oat flaking mill market, Bellaex holds more than 75% market share. Factory visits and reference discussions in China can be arranged.
Ximai
Direct customer reference
RIVERINA Brand
Direct customer reference
Materials
Bellaex oat flaking mills can process not only oats, but also a range of other grains. Customization can also be discussed according to your material and product requirements.
Model & Technical Guidance
Oat Flaking Mill Model Snapshot
Final model selection should be confirmed according to raw material, target flake thickness, target output, and utilities.
For project budgets from USD 20,000 to USD 80,000, Bellaex can match suitable oat flaking solutions for both new plants and retrofit projects.
| Model | FO6060LF |
|---|---|
| Reference Output | 1.0–1.4 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 600 mm |
| Main Drive | 15 × 2 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Dual drive |
| Adjustment | Without online micro-adjustment |
| Bearing Seat | Round pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 4.0 t |
| Model | FO6080LF |
|---|---|
| Reference Output | 1.3–1.7 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 800 mm |
| Main Drive | 15 × 2 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Dual drive |
| Adjustment | Without online micro-adjustment |
| Bearing Seat | Round pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 4.6 t |
| Model | FO6080SF |
|---|---|
| Reference Output | 1.4–1.8 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 800 mm |
| Main Drive | 30 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Single drive |
| Adjustment | Online micro-adjustment |
| Bearing Seat | Square pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 5.5 t |
| Model | FO6100LF |
|---|---|
| Reference Output | 1.7–2.1 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 1000 mm |
| Main Drive | 18.5 × 2 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Dual drive |
| Adjustment | Without online micro-adjustment |
| Bearing Seat | Round pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 5.4 t |
| Model | FO6100F |
|---|---|
| Reference Output | 1.5–1.9 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 1000 mm |
| Main Drive | 18.5 × 2 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Dual drive |
| Adjustment | Online micro-adjustment |
| Bearing Seat | Square pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 6.0 t |
| Model | FO6100SF |
|---|---|
| Reference Output | 1.8–2.2 t/h |
| Flake Thickness | 0.25–0.35 mm |
| Roller Size | 600 × 1000 mm |
| Main Drive | 37 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Single drive |
| Adjustment | Online micro-adjustment |
| Bearing Seat | Square pad |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 6.2 t |
| Model | FO8100F |
|---|---|
| Reference Output | 50–65 t/24h |
| Flake Thickness | 0.40–0.50 mm |
| Roller Size | 800 × 1000 mm |
| Main Drive | 30 × 2 kW |
| Feed Motor | 0.55 kW |
| Drive Type | Dual drive |
| Adjustment | Front hydraulic + dial online adjustment |
| Bearing Seat | Square bearing seat |
| Contact Material | SS304 stainless steel (material-contact parts) |
| Machine Weight | About 8.0 t |
| Series Scope | This oat flaking mill family covers 600 × 600, 600 × 800, 600 × 1000, and 800 × 1000 references. |
|---|---|
| Reference Output Range | About 1.0–2.2 t/h for major 600-series references; FO8100F reaches 50–65 t/24h. |
| LF Models | More economical references with dual drive, without online micro-adjustment, and round pad structure. |
| F / SF Models | Higher-config references with online micro-adjustment for tighter control communication. |
| Drive Difference | LF and F references mainly use dual drive, while selected SF references use single drive. |
| Adjustment Difference | LF references are without online micro-adjustment; F / SF references support online micro-adjustment. |
| Bearing Seat Difference | LF references use round pad; selected SF/F references use square pad. FO8100F uses square bearing seat. |
| Selection Basis | Final selection depends on raw material, target thickness, target output, utilities, and site condition. |
Advantages
Why Buyers Choose Bellaex Oat Flaking Mills
Built for food-grade oat flaking projects that need cleaner structure, easier thickness control, and more stable daily operation.
DISCUSS YOUR PROJECT
Full-Enclosed Structure
Enclosed machine structure helps reduce dust, product loss, and steam-related corrosion in daily oat flaking operation.
Machine Advantage
Online Micro-Adjustment
Selected models support online micro-adjustment so flake thickness can be tuned during production without stopping the machine.
Machine Advantage
Integrated Design
Mechanical, electrical, and hydraulic systems are integrated for cleaner control logic and more practical production management.
Machine Advantage
Premium Rollers
High-Ni-Cr-Mo alloy rollers with dynamic balancing help support wear resistance and more stable flake formation.
Machine AdvantageProcess Fit & Integration
How an Oat Flaking Mill Fits into the Oat Process
Use this section to see where the oat flaking mill fits into a typical oat process, and what should be confirmed before final equipment recommendation.
Raw oats
Process step
Process step
Process step
Process step
Process step
Process step
Oat flakes
Process step
REAL EQUIPMENT GALLERY
Machine Views, Key Details, and Customer Processing Scenes
Review the oat flaking mill through machine views, key details, and real customer-side processing scenes.
Route Extension / Next Step
Choose Your Next Step
Need only one oat flaking mill first?
Continue with single-machine quotation for oat flakes, conditioned grain flakes, replacement, or expansion inside an existing food line.
Planning a wider oat processing line?
Use this entry when your scope also includes cleaning, conditioning, drying, cooling, conveying, or packing coordination.
Need a higher-control route first? Open the water-cooled page.
WHY CHOOSE BELLAEX
Oat Flaking Mill and Workshop View
Equipment / Factory ReferenceWHY BUYERS TRUST BELLAEX
Manufacturing Strength Behind Our Oat Flaking Mill
For a standalone oat flaking project, buyers usually evaluate more than the machine itself. They also look at the supplier’s manufacturing background, technical communication quality, and ability to support future expansion.
Since 1997
Group manufacturing background
50+ Countries
Overseas customer coverage
12,000+ m²
Workshop and office area
Food & Grain Equipment
Long-term manufacturing background
Group-backed manufacturing capability
Bellaex is backed by a long-established manufacturing group with practical experience in processing equipment and project delivery.
Clear technical communication for food and grain projects
You can discuss food-contact parts, roll material, flake thickness, hydraulic adjustment, and machine structure with a team familiar with flaking equipment.
Support for replacement, upgrade, and future expansion
A project can start from one oat flaking mill and later extend to replacement planning, new oat flaking positions, or wider process support when needed.
PROJECT SUPPORT
How Bellaex Supports an Oat Flaking Project
Even when your project starts from one oat flaking machine, the discussion often includes raw material condition, target thickness, utilities, layout limits, and possible future expansion.
Machine selection and material-fit discussion
Support around oats or similar cereal materials, target thickness range, expected product format, and basic output direction.
Utilities and layout review
Early discussion can include steam condition, power supply, available space, old machine replacement limits, and line connection points.
Upgrade path from one machine to wider process planning
If your scope becomes larger later, the discussion can extend to conditioning, conveying, cooling, or broader oat processing integration.
FAQ + Downloads
FAQ
Before submitting your inquiry, review these common oat flaking mill questions and download the current technical materials.
1
What information should I prepare first?
Share raw material type, conditioning condition, target thickness, daily output, utilities, and site limits first.
2
Which models are documented in the current technical data?
Current references include FO6060LF, FO6080LF / FO6080SF, FO6100F / FO6100LF / FO6100SF, and FO8100F.
3
How should thickness targets for oat flaking be understood?
Major references in this standard route list 0.40-0.50 mm. Final target thickness should be confirmed by model, material condition, and product goal.
4
What are the key differences across available models?
LF models are more economical references, while SF/F models are higher-config options. Not every model has the same adjustment method or bearing-seat structure.
Download Project Materials
Use these oat flaking mill files for internal technical review. Additional selection and layout sheets can be requested in the form.
+
NEXT STEP
Get Your Oat Flaking Mill Recommendation
Share your raw material, target thickness, target capacity, project application, and site conditions.
The Bellaex team will review your information and reply with a suitable model and process-direction recommendation for your project.
Or contact us directly through: